LH370/375 Quick Start Guide
Headset Jack Installation – Quick Start Guide
Does your office phone have a headset button? If so, you’re in the right place. If not, flip this guide over for installation instructions
Plug one end of the green cord into the green telephone connector jack on the back of your Leitner base
Plug the other end of the green cord into the headset jack of your phone. If you don’t have a headset jack, go to Step 1 on the reverse side
Ensure the Compatibility Switch is set correctly (most phones use setting 1). You can always call us to get the correct setting for your phone
Plug the AC adapter into your base and gently pull out the tab from your headset to activate the battery. Set your headset in the base and let it charge for at least 4 hours before using
Handset Jack Installation – Quick Start Guide
Does your office phone have a headset button? If so, flip this guide over for installation instructions via the headset jack
Unplug the telephone handset’s curly cord from your phone base and plug into the blue handset jack on the back of your Leitner base
Plug the green telephone cord into the green telephone connector jack on the back of your base. Plug the other end of the green cord into the handset jack of your phone
Ensure the Compatibility Switch is set correctly (most phones use setting 1). You can always call us to get the correct setting for your phone
Plug the AC adapter into your base and gently pull out the tab from your headset to activate the battery. Set your headset in the base and let it charge for at least 4 hours before using
