LH280 Quick Start Guide
LH280 Quick Start Guide
Installing without a headset icon on your phone
Flip to the other side if your phone has a headset icon

Unplug the telephone handset’s curly cord from the phone base and plug into the Handset Port on the LH280

Plug one end of the telephone connector cord (green cord) into the Handset Jack of your phone. Plug the other end into the Telephone Connector Port (TEL Port) on the LH280 base

Make sure the Compatibility Switch is set correctly (most phones use setting 1). You can always call us to get the correct setting for your phone mode

Plug in the base with the included AC adaptor. Install the battery into the headset and place in the base. Let it charge for 4 hours

To replace the eartip, first grasp the existing eartip firmly and rotate counterclockwise to remove

To install the new eartip, insert it into the opening in the headset, being sure to align the tabs on the eartip with the notches in the opening. Rotate clockwise to tighten
LH280 Quick Start Guide
Installing with a headset icon on your phone
Flip to the other side if your phone doesn’t have a headset icon

Plug one end of the telephone connector cord (green cord) into the Handset Jack of your phone. Plug the other end into the Telephone Connector Port (TEL Port) on the LH280 base

Plug the other end of the telephone cord into the Headset Jack of your phone

Make sure the Compatibility Switch is set correctly (most phones use setting 1). You can always call us to get the correct setting for your phone model

Plug in the base with the included AC adaptor. Install the battery into the headset and place in the base. Let it charge for 4 hours

To replace the eartip, first grasp the existing eartip firmly and rotate counterclockwise to remove

To install the new eartip, insert it into the opening in the headset, being sure to align the tabs on the eartip with the notches in the opening. Rotate clockwise to tighten