Leitner Wireless Headset Basic Setup – Cisco Phone

    Support › Cisco Basic Setup

    1. Plug the green telephone cord into the green telephone port on the back of your charging base
    2. Plug the other end of the green telephone cord into the headset jack of your telephone
    3. No headset jack? Unplug the handset receiver (curly cord) from your telephone base and connect it to the blue handset port of your charging base. Take the other end of the green telephone cord (from step 2) and plug it into your phone where the handset receiver was previously connected
    4. If using the headset jack, set the switches on the bottom of your charging base to RHL & 4. If using the handset jack, set those switches to RHL & 1
    5. Connect the power cord to your charging base and let your headset charge for at least four hours
    6. Click here for a guide on computer setup