Leitner Wireless Headset – BusyBuddy Setup

    BusyBuddy Setup with Leitner OfficeAlly

    Support › BusyBuddy Setup with Leitner OfficeAlly

    1. Connect Leitner connector cord (green tape) from green TEL port on Leitner base to the bottom of your BusyBuddy (the side with the "Light" dial)
    2. Flip charging base over, and press and hold the mic volume up button on the bottom of the base. When telephone mode button on the front of the base begins blinking, let go
    3. Set compat switches on the side of the BusyBuddy to 1 and 3 for most phones
    4. Plug the lamp into the port labeled..."Lamp"
    5. Connect power into the middle port of the BusyBuddy. You can use either DC/outlet power or USB
    6. Now, take the telephone cord that came with the BusyBuddy and connect it into the port next to the power. The other end goes to the phone
    7. On your phone, connect the BusyBuddy phone cord into either your Headset or Handset port, depending on your phone and setup. If you use a lifter, you’ll go Handset. If you use an EHS, use the Headset port
    8. You're done!

    Contact us lorem ipsum

    Contact Us

    212-230-4525

    info@leitnerheadsets.com

    International Customers

    international@leitnerheadsets.com

    Corporate & Enterprise

    corporatesales@leitnerheadsets.com

    Canada

    canada@leitnerheadsets.com

    Bulk ordering

    Looking to order bulk? Click here

    Need a bunch?

    Meeting the needs of an entire office can be challenging. My job is to make sure that your team gets exactly what they need!

    You can try out any of our headsets on a 60-day free trial, to make absolutely sure you're getting the right fit.

    Fill out the form to the right and I'll be in touch within 1 business day.

    Shelby Colraine

    Volume Purchasing Specialist

    415-351-5827

    Your Details

    Create an account

    Sign In